Rotary Magnetic Encoder Demoboard
Austria Microsystems AS5030DEMOBOARD
Demoboard Block Diagram
Resource Center
Demoboard User Guide
509.5 KB
AS5030 Datasheet
689.6 KB
AS5030 Web Page
AS5030 Fact Sheet
159.3 KB
Recommended Magnet Datasheet
147.3 KB
AS5000 Magnets for extended vertical range
605.6 KB
AS5000 Magnet selection guide
826 KB
Manufacturer Kit Part Number
Austria Microsystems AS5030DEMOBOARD
Kit Type
Demonstration Kit
[What's This?]
Manufacturer's Suggested Kit Price
$193.75
Sensor Type
Hall Effect/Magnetic
Kit Description
The AS5030 Demoboard provides a platform to quickly evaluate the performance of the AS5030 Rotary Encoder SOC. A USB cable and desktop GUI is provided to fast, user-friendly access to the AS5030 output.
The AS5030 is a contactless magnetic rotary encoder for accurate angular measurement over a full turn of 360°.
It is a system-on-chip, combining integrated Hall elements, analog front end and digital signal processing in a single device.
To measure the angle, only a simple 2-pole magnet rotating over the center of the chip is required.
The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 8 bit = 256 positions per revolution. This digital data is available as a serial bit stream and as a PWM signal.
In addition to the angle information, the strength of the magnetic field is also available as a 6-bit code.
Data transmission can be configured for 1-wire (PWM), 2-wires (CLK, DIO) or 3-wires (CLK, DIO, CS).
A software programmable (OTP) zero position simplifies assembly as the zero position of the magnet does not need to be mechanically aligned.
A power down mode together with fast startup- and measurement-cycles allows for very low average power consumption and makes the AS5030 also suitable for battery operated equipment.
Included in Kit
Demoboard, USB Cable, CD with demo GUI
Demoboard Block Diagram
Resource Center
Demoboard User Guide
509.5 KB
509.5 KB
AS5030 Datasheet
689.6 KB
689.6 KB
AS5030 Web Page
AS5030 Fact Sheet
159.3 KB
159.3 KB
Recommended Magnet Datasheet
147.3 KB
147.3 KB
AS5000 Magnets for extended vertical range
605.6 KB
605.6 KB
AS5000 Magnet selection guide
826 KB
826 KB
Manufacturer Kit Part Number
Austria Microsystems AS5030DEMOBOARD
Kit Type
Demonstration Kit
[What's This?]
Manufacturer's Suggested Kit Price
$193.75
Sensor Type
Hall Effect/Magnetic
Kit Description
The AS5030 Demoboard provides a platform to quickly evaluate the performance of the AS5030 Rotary Encoder SOC. A USB cable and desktop GUI is provided to fast, user-friendly access to the AS5030 output.
The AS5030 is a contactless magnetic rotary encoder for accurate angular measurement over a full turn of 360°.
It is a system-on-chip, combining integrated Hall elements, analog front end and digital signal processing in a single device.
To measure the angle, only a simple 2-pole magnet rotating over the center of the chip is required.
The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 8 bit = 256 positions per revolution. This digital data is available as a serial bit stream and as a PWM signal.
In addition to the angle information, the strength of the magnetic field is also available as a 6-bit code.
Data transmission can be configured for 1-wire (PWM), 2-wires (CLK, DIO) or 3-wires (CLK, DIO, CS).
A software programmable (OTP) zero position simplifies assembly as the zero position of the magnet does not need to be mechanically aligned.
A power down mode together with fast startup- and measurement-cycles allows for very low average power consumption and makes the AS5030 also suitable for battery operated equipment.
The AS5030 is a contactless magnetic rotary encoder for accurate angular measurement over a full turn of 360°.
It is a system-on-chip, combining integrated Hall elements, analog front end and digital signal processing in a single device.
To measure the angle, only a simple 2-pole magnet rotating over the center of the chip is required.
The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 8 bit = 256 positions per revolution. This digital data is available as a serial bit stream and as a PWM signal.
In addition to the angle information, the strength of the magnetic field is also available as a 6-bit code.
Data transmission can be configured for 1-wire (PWM), 2-wires (CLK, DIO) or 3-wires (CLK, DIO, CS).
A software programmable (OTP) zero position simplifies assembly as the zero position of the magnet does not need to be mechanically aligned.
A power down mode together with fast startup- and measurement-cycles allows for very low average power consumption and makes the AS5030 also suitable for battery operated equipment.
Included in Kit
Demoboard, USB Cable, CD with demo GUI
