Motor Control Evaluation Board Using the Motion-SPM™ FSB50450
Fairchild FEB155
Schematic
Resource Center
User Guide FEB155
1.1 MB
FSB50450 SPM
417.7 KB
Fairchild Semiconductor
Manufacturer Kit Part Number
Fairchild FEB155
Kit Type
Evaluation Kit
[What's This?]
Manufacturer's Suggested Kit Price
$62.50
Kit Application
Motor Control
Kit Description
The Motion-SPM in Tiny-DIP combines six FRFETs and three half-bridge HVICs in a compact, thermally efficient, 29 x 12 mm DIP package.
FSB50450 is a tiny smart power module (SPMTM) based on FRFET technology as a compact inverter solution for small power motor drive applications such as fan motors and water suppliers. It is composed of 6 fast-recovery MOSFET (FRFET), and 3 half-bridge HVICs for FRFET gate driving. FSB50450 provides low electromagnetic interference (EMI) characteristics with optimized switching speed. Moreover, since it employs FRFET as a power switch, it has much better ruggedness and larger safe operation area (SOA) than that of an IGBT-based power module or one-chip solution. The package is optimized for the thermal performance and compactness for the use in the built-in motor application and any other application where the assembly space is concerned. FSB50450 is the most solution for the compact inverter providing the energy efficiency, compactness, and low electromagnetic interference.
IC Features
* 500V 3.0A 3-phase FRFET inverter including high voltage integrated circuit (HVIC)
* 3 divided negative dc-link terminals for inverter current sensing applications
* HVIC for gate driving and undervoltage protection
* 3/5V CMOS/TTL compatible, active-high interface
* Optimized for low electromagnetic interference
* Isolation voltage rating of 1500Vrms for 1min.
Included in Kit
Eval Board
Not Included in Kit
BLDC Motor
Hall Sensor
Cables
Power supply
Supported Part Numbers
FBS50450
Motor Type
Brushless DC motor
Schematic
Resource Center
User Guide FEB155
1.1 MB
1.1 MB
FSB50450 SPM
417.7 KB
417.7 KB
Fairchild Semiconductor
Manufacturer Kit Part Number
Fairchild FEB155
Kit Type
Evaluation Kit
[What's This?]
Manufacturer's Suggested Kit Price
$62.50
Kit Application
Motor Control
Kit Description
The Motion-SPM in Tiny-DIP combines six FRFETs and three half-bridge HVICs in a compact, thermally efficient, 29 x 12 mm DIP package.
FSB50450 is a tiny smart power module (SPMTM) based on FRFET technology as a compact inverter solution for small power motor drive applications such as fan motors and water suppliers. It is composed of 6 fast-recovery MOSFET (FRFET), and 3 half-bridge HVICs for FRFET gate driving. FSB50450 provides low electromagnetic interference (EMI) characteristics with optimized switching speed. Moreover, since it employs FRFET as a power switch, it has much better ruggedness and larger safe operation area (SOA) than that of an IGBT-based power module or one-chip solution. The package is optimized for the thermal performance and compactness for the use in the built-in motor application and any other application where the assembly space is concerned. FSB50450 is the most solution for the compact inverter providing the energy efficiency, compactness, and low electromagnetic interference.
FSB50450 is a tiny smart power module (SPMTM) based on FRFET technology as a compact inverter solution for small power motor drive applications such as fan motors and water suppliers. It is composed of 6 fast-recovery MOSFET (FRFET), and 3 half-bridge HVICs for FRFET gate driving. FSB50450 provides low electromagnetic interference (EMI) characteristics with optimized switching speed. Moreover, since it employs FRFET as a power switch, it has much better ruggedness and larger safe operation area (SOA) than that of an IGBT-based power module or one-chip solution. The package is optimized for the thermal performance and compactness for the use in the built-in motor application and any other application where the assembly space is concerned. FSB50450 is the most solution for the compact inverter providing the energy efficiency, compactness, and low electromagnetic interference.
IC Features
* 500V 3.0A 3-phase FRFET inverter including high voltage integrated circuit (HVIC)
* 3 divided negative dc-link terminals for inverter current sensing applications
* HVIC for gate driving and undervoltage protection
* 3/5V CMOS/TTL compatible, active-high interface
* Optimized for low electromagnetic interference
* Isolation voltage rating of 1500Vrms for 1min.
* 3 divided negative dc-link terminals for inverter current sensing applications
* HVIC for gate driving and undervoltage protection
* 3/5V CMOS/TTL compatible, active-high interface
* Optimized for low electromagnetic interference
* Isolation voltage rating of 1500Vrms for 1min.
Included in Kit
Eval Board
Not Included in Kit
BLDC Motor
Hall Sensor
Cables
Power supply
Hall Sensor
Cables
Power supply
Supported Part Numbers
FBS50450
Motor Type
Brushless DC motor
